GOODS IN SINGAPORE
-This is universal type Wall/ceiling fan remote control which can replace your existing remote fan if you lost it or defect. -This remote is loaded with huge of fan compatible brand code. -Hence for certain brand and model (eg. twister fan) it might not sycn 100% same with your original remote, for some brand it might sync the button randomly with your original remote.
NOT FOR BUY TO TEST PURPOSE, NO RETURN.
Product feature:
-Only support models in picture below.
-Buyer should check the model at below before purchase.
-Return is only accepted if no power.
-Enable distance: more than 8 metres
-Power requirements: DC 3 v
-Battery type: two size AAA batteries (NOT INCLUDED)
Suitable for: KDK, Winter, Regency, Khind, Deka, Fanco, aerogas, Panasonic, monteair II, EURO-UNO, Mistral, Midea, Fan Hub, Alpha, elmark, wing, rubine, Oshino, morgan, mastar, milux
How to use:
You can use it directly straight out of the box or manually set by holding down the SET button for about 1 min 40 seconds until the remote signal being received by the fan. Please take note that the off/on and speed mode may not in proper order for some brands.
4 STEPS TO SYNC YOUR REMOTE
1) Do a factory RESET of the remote.
FACTORY RESET = press SET + OFF/ON buttons together for about 5 seconds (LED will flash 3 times)
Make sure your LED flashes 3 times during this step 1.
2) Try on the fan immediately after doing the factory RESET (do not do any settings after factory reset)
3) If STEP 2 fail, try pointing to your fan and press the SET button for 1 min 40 sec.
4) Stop pressing the SET button if your fan react or u heard a beep sound during the 1 min 40 sec.
* If you have LOCK your remote, please unlock it before u do the above 4 steps
* To unlock - Press and hold LOCK/UNLOCK button for 5 seconds (LED will flash 3 times)