1500W 10A 12V Time Delay Relay Module Dual Display Cycle Relay Timer Board
Feature:
1. Timing range: 0-999seconds, 0-999minutes, 0-999hours, three kinds can select the desired.
2. Feature Sets: delay, timing, cycle18 kinds of combinations of features.
3. The product can be used for timing, delay, cycle timing, intermittent timing, etc.
4. The product can be used for timing switch, and the control panel of the timer alarm.
5. Maximum working current is 10A, maximum power is 1500W.
Specification:
Product size: 3 x 9.7 x 5.2cm/1.1 x 3.8 x 2.0 inch
Time range: 0-999s / 0-999m / 0-999h
Maximum working current : 10A
maximum power: 1500W
Voltage: DC 12v
Weight: 70g
Instruction Manual:
Before using the first prompt the user to note that a certain set of data After waiting 6s, 6s after the memory module will automatically save the data set.
(1) Press SET key to enter the time setting mode, the digital tube flicker, buttons plus or minus buttons to adjust the timing T 1 and the timing T 2, after setting the time, must wait 5s, 5s after the module will automatically remember save data.
(2) Press SET, the parameter setting mode. There are two sets of parameters for the user to select P0, P1. In the current mode Short press SET to switch P0, P1. In P0, P1 parameter can be set for their own timer mode through the key addition and subtraction.
P0--0: timing mode is 0--999 ??seconds
P0--1: timing mode is 0--999 ??minutes
P0--2: timing when the pattern is 0--999 ?? hours
P1--0: T1 time delay relay (T 1 timer)
P1--1: T1 delay time relay releases (T 1 timer)
P1--2: time delay relay after T 1 (T 1 timer), then the delay time T 2 successor electrical release (T 2 timing) ends.
P1--3: T1 delay time relay releases (T 1 timer), then the delay time T 2 successor Electric energized (T 2 timing) ends.
P1--4: time delay relay after T 1 (T 1 timer), then the delay time T 2 successor electrical release (T 2 timer), repeat the cycle.
P1--5: T1 delay time relay releases (T 1 timer), then the delay time T 2 successor Electric energized (T 2 timer), repeat the cycle.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.