80A MPPT Solar Panel Regulator Charge Controller 12/24V Auto Switch+Connector
Specification of Solar charge controller :
This is a three-time controller into the evening (evening) working time ,an interval of rest or pause time,Dawn working time (morning light function),the user can according to their needs ,set a different time.
A: time(evening working) B: time(Pause working) C: time(dawn working)
This is a compatible MPPT charge controller PWM intelligent/efficient/energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10%-30%higher than the ordinary controller charging efficientcy, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.
MPPT solar controller applied to the solar photovoltaic system which is used to coordinate solar panels, storage battery and load. It is a very important assembly in the photovoltaic system. It is different from other solar controllers that it is add the comprehensive protection function makes the whole solar photovoltaic system operate efficiently and safely.
Timer Intigrated (Lighting function)
1, LCD screen display,
2, Easy operation interface,
3, PWM charging mode+MPPT,
4, Parameter user can reset,
5, A key to open and close the load,
6, A key to restore the factory settings,
7, Battery reverse discharge protection,
8, Battery reverse polarity protection
9, Battery under voltage protection,
10, Overload, short-circuit protection,
11, Automatic temperature compensation function,
12,Can charge and discharge at the same time, Always keep the battery in full status
13, USB 5V charge (current 1500mA) Optional
Specification of MC4 Connector:
Rated current: 25A (2.5-4.0mm2)
Degree of protection: IP2 * / IP67
Rated voltage: 1000V DC
Flammability rating: UL94-V0
Test voltage: 6000V (50Hz, 1min)
Safety: II
Overvoltage category / Pollution Index: CATIII / 2
Adapter Wire: OD4.5-7.0 (2.5-4.0mm2)
Connector contact resistance: 0.5m
Insertion / Extraction Force: 50N / 50N
Connector conductor material: copper, tin
Connection: Crimp
Connector Insulation material: PPO or PBT
Operating temperature range: -40 ~ +90
Package contents:
1* 80A MPPT Solar Controller
1* English User Manual
1* Temp Sensor
5 pairs solar panel cable connector