10pcs TP4056 5V Mini USB 1A Lithium Battery Charging Board Linear Charger Module`
This module can be used for single lithium battery charging or multiple lithium battery charging, powered by USB interface.
Note:
Ammeter can only be connected to 5V input end of the module.
It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
The connection wire should not be too thick.
Make sure the connect point is good.
If the input voltage is too high, like 5.2V, the current will be less than 1000mA, it is normal.
It is protection function, auto-substract the charging current to avoid burn damage to chip.
NO Reveral polarity.
Specifications:
Quantity: 10pcs
Charge Module: Linear Charging
Current: 1A Adjustable(Need to replace the resistance)
Charge Precision: 1.5%
Input Voltage: 4.5V-5.5V
Full Charge Voltage: 4.2V
Led Indicator: Red is charging, Green is full charged.(Or red is charging, blue is full charged)
Input interface: mini USB.
Work Temperature: -10°C to 85°C
Inversed Polarity: NO
Size(1pc): 28 * 19 * 6mm
Package Size: 9.5 * 5cm
Package Weight: 22g / 0.78oz
Package List:
10 * Lithium Battery Charging Board Charger Module