Leather Cobbler Sewing Machine Black Shoe Repair Tool Equipment Heavy Duty
Technical dataModel: JX-JJMaterial: ironColor: BlackProcess: electroplating, sprayingType: Semi-manualMaximum stitch width: 6mm/0.24inMaximum cutting thickness: 3-5mm/0.12-0.2in (actual cutting thickness depends on material)Installation required: YesMounting type: Floor standingNumber of elements: 1Gross weight: 11kg/ 24.25 lbsNet weight: 10.5kg/ 23.15 lbsProduct size (L*H): 44*28 cm/ 17.32*11.02 inSize of stand: 63*48cm/24.8*18.9inPackage size: 48*13.5*30.5 cm/18.9*5.31*12 inPackage included1.Handschuster shoe repair machine1.English manualAll accessories for installationNotes1. when you adjust the top thread tension, you only need to adjust one of them.2.The material of this product is iron, which is easy to rust, so the surface of the machine is coated with anti-rust oil. One side of the bracket of the machine is stable, if not, please install it on one side.3.it is handmade by the blacksmith, so that the product leaves a knock mark, and is not as smooth as the machine making the mold.4.The moving parts of this product need to be refilled regularly to ensure the machine runs light and noiseless, improve efficiency and extend service life. It is recommended that the machine, which has not been used for a long time, should be lubricated before use.5.Preparatory work before operation: Pull the presser foot up to avoid friction between presser foot and stitch plate, check the tight fit of each fixing screw, add lubricating oil (not included) to each oil spot, then shake the guide plate without using the noise of jamming.6.Do not shake the handle backwards during work to prevent the coil from knotting inside. The needle slot must point outwards so that the thread does not tear.7. Please read the operating instructions completely before use. Pay particular attention to the safety instructions.8.please allow the slight color difference by recording light and the 1-3cm errors due to manual measurement, and make sure you don't mind before ordering.