CONENTOOL 16 Lines Laser Level Self-Leveling 360° 4D with 2 X Rechargeable Li-ion Battery, Horizonta
Feature:●360° Laser Lines with Touch Control Panel This 16 lines laser level projects 360° two horizontal plane and two 360° vertical planes,cover the floor, walls and ceiling all around the room. The strong green laser beam with high visibility can adjust the intensity. Give you a more comfortable experience. ●360° Adjustable Mini Tripod It is not only suitable for tile ceilings, but also has an adjustable lifting platform, from 0.9 inches to 3.4 inches, which can be used for walls, floors and ceilings. One button can easily project the lines together or independently (cross lines, vertical lines and horizontal 360 degrees) ●Adjustable Lift Platform The lifting base can adjust the height of the laser line above the ground and meet your different needs. You can be raised up to a max height of 3½ feet and lets you securely position the tool on the floor or a table. ●Comes with 2 Batteries The laser level meter uses a rechargeable large-capacity lithium-ion battery. Even if the battery is removed, it can be directly inserted into the level gauge and used on the job site. Use the battery charger to charge the battery independently. Specifications: - Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output- Material: ABS plastic shell- Laser type: 515nm green- Laser class: Class 2 (＜10mW)- Laser harness: 16 lines 4D green light (360°x4), 4/8/12/16 lines adjustable- Working distance: 20m ~ 30m- Horizontal/vertical accuracy: ±2.2mm/10m- Automatic leveling range: ±3°- Working time: 6~8 hours- Wall distance: 7mm- Working temperature: -10°C~45°C- Protection level: IP54- Slash function: Yes- Working environment: indoor and outdoor Package Contents:1x 4D laser Level1x Upper Wall Iron Plate1x Mini Tripod1x Lifting Base1x Magnetic Bracket1x 5/8" Adapter^&Manual1x Remote Control1x Charger2x Lithium Battery1x Hand-shell Carrying Case ▶How to use ?Step 1: Fix the metal gasket in the position you wantStep 2: Install the adapter on the laser window and the bracket; then directly connect the bracket base to the metal plate through magnetismKnob A: Control sliding forward or backwardKnob B: Control the vertical tilt of the device by controlling the bracket. Use in an inclined stateKnob C: Rotate the arc of the control device to the left or right. "H" is Horizontal switch button."V" is Vertical switch button. Laser Level with Self-leveling mode and Manual mode1. Self-leveling mode ----- When the laser tool is switched to the unlocked position, the self-leveling mode is activated. When the tool exceeds the self-leveling range >3°, the laser beam will continue to flicker. Free hands to automatically level and improve work efficiency.2. Manual mode ---- In manual mode, the laser tool can be placed at any angle to project a non-horizontal straight line. If Power Switch is OFF, you can turn on the slope mode by pressing "H” 5 seconds, project lines at any position or angle. It is very suitable for hanging pictures diagonally or building slopes